Danfoss ET9500, Operator'S Manual

Page: 30 / 56

3. Activate the machine at the main power switch (5).
4. Move handle (1) steadily, slowly towards the cutting plate.
5. The feed fork (2) moves forward.
The cutting process is completed.
6. Move handle (1) upwards to the starting position.
The feed fork (2) moves backward.
7. Deactivate the machine at the main power switch (5).
8. Remove the workpiece.
5.4 Deactivation
1. Complete the cutting process.
2. Deposit the workpiece outside the machine.
3. Deactivate the power switch (1).
4. Check the machine for contamination and outside damage.
5. Check the cutting knives for damage and cracks.
6. Remove dirt, dust and chips by using a vacuum cleaner.
WARNING!
Risk by bursting screens
Workpieces may penetrate porous screens, which may result in
damage to the face and body.
• Check polycarbonate screens regularly and replace them at
the specified intervals.