Danfoss ET9500, Operator'S Manual

Page: 7 / 56

1 About this document
The "Cutting machine Danfoss ET9500" is consistently designated as
machine in this Operation Manual.
This Operation Manual includes important notes on how you operate
your machine/unit safely, properly and economically.
Use not in compliance with the intended purpose may result in hazard
to the operator's health and life and/or in the risk of damage to/the
machine/unit. Consequently, please only use the machine/unit
•
in good order and condition,
•
in accordance with its intended purpose,
•
in a safety-conscious manner, with awareness of risks and haz-
ards,
•
in compliance with all notes included in this Operation Manual.
The machine/unit may only be operated by staff who
•
has read the Operation Manual,
•
has understood it,
•
has been instructed in the operation of the machine/unit, and
•
has signed in the Annex.
Figures may include accessories/options. Customer-specific
equipment may vary.
The product images shown are for reference only and may differ
from the product delivered.
1.1 Target groups
The target groups of this Operation Manual are:
Owner
An owner is a natural person or entity using the device himself/her-
self/itself, or on whose behalf the device is used. An owner may ap-
point a representative to exercise the owner's rights and obligations.
The owner has to make sure that
•
national provisions, occupational safety regulations and applica-
ble environmental protection regulations are fully complied with;