2.
Position the cutting plate flush with the table edge.
3.
Bolt the machine on the bench.
Place the machine in a way so that it is easily accessible for main-
tenance work from all sides.
4.
Check the machine for damage.
5.
Check the electric cables for damage.
6.
Train the operating staff and record training sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during the cutting process. There is a
risk of being injured.
• Perform a cutting process in idle mode and without a work
piece.
• Check the machine for atypical noise.
Summary of Contents for ET9500
