Danfoss ET6300, Operator'S Manual

Page: 15 / 44

The steel type holder (3) is moved towards the bearing block (4) over
the vertical guide (6) by turning the hand wheel (7). As a result, the
work piece is fixed on the bearing blocks.
The guide carriage (2) is moved horizontally using the operating lever
(1). During embossing, the work piece circumference is rolled against
the steel types.
By turning the clamp lever (3) or by using an M12 bolt, the hand
wheel (8) and the steel type holder (4) may be fixed in order to pro-
vide protection against independent vertical sliding after several em-
bossing processes.
Accessories
The machine can be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".