9.
Insert the block (3).
10. Tighten the clamping screw (4).
Make sure that clamp has been installed correctly and securely.
Check the correct (non-reversed) arrangement of the types by me-
tallic mirror.
5.2.4 Embossing with steel type holder, double-row without wheels
1.
Insert steel types (1) in steel type holder. Neutral types allow a
space to be left between the markings.
2.
Tighten the clamping screws (2).
3.
Loosen the clamping screws (3).
Make sure that clamp has been installed correctly and securely.
Summary of Contents for ET6300
