Danfoss ET6300, Operator'S Manual

Page: 24 / 44

5.2.2 Embossing
1. Set the bearing blocks (3) to the requested workpiece size -
three positions are available.
The bending pin position and the work piece diameter are matched
to each other: Large sleeve diameter = large distance of bearing
blocks. Small sleeve diameter = small distance of bearing blocks.
2. Unscrew the star knob screw (2).
3. Displace the bearing blocks (3) to the requested position and se-
cure them using the star knob screw (2).
4. Position the work piece on the bearing blocks (2).