Danfoss ET6300, Operator'S Manual

Page: 26 / 44

5.2.3 Embossing with steel type holder, single-row with 4 wheels
1. Insert steel types (1) in steel type holder. Space types allow a
space to be left between the markings.
2. Tighten the clamping screw (5).
3. Loosen the clamping screw (6).
4. Loosen retaining pin (7).
5. Adjust the daisy wheels (2).
The setting of the type wheels (8) represents the markings to be
embossed.
6. Fix the retaining pin (7).
7. Tighten the clamping screw (6).
8. Loosen the clamping screw (4).