The crimping tool (1) is closed hydraulically, whereby the workpiece
is formed. The pressure needed for this purpose is built up by the
electrically driven pump (2) in the cylinders.
The actual forming process is controlled via the buttons on the control
panel (5).
The micrometer (2) is used to change the final diameter of the die
system.
Crimping tool
The die system comprises basic dies, intermediate dies (depending
on the application) and crimping dies.
All basic dies are supported on slide plate. The crimping dies and the
intermediate dies, if any, are placed on the basic dies (1). The inter-
mediate dies are needed, if small workpieces are to be formed on a
large machine.
After the forming process, the basic dies are pressed apart by the
springs (2) when the tool opens. The bearing segments (3) on the
front guide the basic dies axially in the tool.
Summary of Contents for ET4500-001
