![background image](http://html.mh-extra.com/html/molex/at-2212/at-2212_specification-sheet_1824089001.webp)
AT-2212 Air Crimp Tool Head
Doc No: ATS-640053600
Release Date: 06-24-03
UNCONTROLLED COPY
Page 1 of 8
Revision: B
Revision Date: 09-30-05
Air Powered
Crimp
Tool Head
Application Tooling
Specification Sheet
Order No. 64005-3600
Engineering No. AT 2212
FEATURES
Quick-change tool head for the 19279-0001 (AT-200)
A precision user-friendly terminal locator stop holds terminals in the proper crimping position
SCOPE
Products: Nylon closed end connectors 12–22 AWG. This tool head is intended for use in the 19279-0001 (AT-200)
either hand held or with optional bench adapter 19078-0307 (ATBA) and foot switch.
Testing
Mechanical
The tensile test or pull test is a means of evaluating the mechanical properties of the crimped connections. The
following charts show the UL specifications for various wire sizes. The tensile strength is shown in pounds and
indicates the minimum acceptable force to break or separate terminal from the conductor. On this style product,
only the reading from the smallest wire AWG is used. See Chart 1
Wire Size (AWG) UL – 486 C
22
8
20
10
18
10
16
15
14
25
12
35
* UL – 486 C – Closed end connectors and Wire Nuts.
The following is a partial list of the product part numbers and their specifications that this tool is designed to run.
We will be adding to this list and an up to date copy is available on www.molex.com.
Terminal No. Terminal Eng No. (REF)
Wire Size
Wire Combinations
AWG
mm²
19160-0009
NC-2212
12 - 22 (3.30-0.35)
See Chart 1
19160-0010
NC-2212-L
12 - 22 (3.30-0.35)
See Chart 1
19160-0011
NC-2212-BA
12 - 22 (3.30-0.35)
See Chart 1