![Danfoss EM-PMI375 User Manual Download Page 9](http://html1.mh-extra.com/html/danfoss/em-pmi375/em-pmi375_user-manual_3432254009.webp)
EM-PMI375-T800 options (continued)
Variant
Code
Description
Additional information
Rotation sensor (resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 6-pole
pair
+RES2
Double resolver
2 x In-built non contacting resolver, 6-pole
pair
Winding temperature
sensor
*
Temperature surveillance
3 x PT100 in windings
+TEMP4
Redundant temperature
surveillance
6 x PT100 in windings
+TEMP5
Redundant temperature
surveillance
12 x PT100 (two wire) in windings (Not
available with +LVB1 option)
Bearing temperature
sensors
*
None
+BTMP1
PT100 in bearings
Plug-in connector
Anti-condensation heaters
*
None
+HEAT1
One anti-condensation
heater
230VAC/65W
Marine classification
*
No marine classification
+CL1
ABS American Bureau of Shipping
+CL2
BV Bureau Veritas
+CL3
DNV
+CL4
LR Lloyd’s Register
+CL5
RINA
EM-PMI375-T1100 options
Variant
Code
Description
Additional information
High voltage connections
*
One 3 phase system
One connection box containing one 3
phase system with one M25 cable gland
per phase
-DUAL
Two galvanically isolated 3
phase systems
Two connection boxes each containing
one 3 phase system with one M25 cable
gland per phase
-TRI
Three galvanically isolated
3 phase systems
Two connection boxes one containing one
3 phase system and another one
containing two 3 phase systems with one
M25 cable gland per phase
Low voltage connections
*
Low voltage connections
done with connector
DEUTSCH HD34-24-47PE connector for LV
connections
+LVB1
Low voltage connections
done with connection box
and terminal strip
Connection box with 2x M25 cable glands
(reserve 2x plugged M16 threads
available) and terminal block for LV
connections
N-end attachment
*
Flange
SAE 4 flywheel housing
+NE2
Male shaft + Flange
DIN5480 W50x2 SAE 4 flywheel
housing
Bearing lubrication and
mounting direction
*
Grease lubricated
Deep groove ball bearing, open design.
Horizontal mounting direction.
+BGL
Greased for life
Deep groove ball bearing, contact seal on
both sides. Any mounting direction.
Maximum speed 3400 rpm.
User Guide
EM-PMI375
General information
©
Danfoss | November 2021
BC265856307805en-000202 | 9