EM-PMI375-T200 options
Variant
Code
Description
Additional information
Low voltage connections
*
Low voltage connections
done with connector
DEUTSCH HD34-24-47PE connector for LV
connections
+LVB1
Low voltage connections
done with connection box
and terminal strip
Connection box with 2x M25 cable glands
(reserve 2x plugged M16 threads
available) and terminal block for LV
connections
N-end attachment
*
Flange
SAE 4 flywheel housing
+NE2
Male shaft + Flange
DIN5480 W50x2 SAE 4 flywheel
housing
Bearing lubrication and
mounting direction
*
Greased for life
Deep groove ball bearing, contact seal on
both sides, any mounting direction (see
user guide for details)
+BHS
Grease lubricated
Deep groove ball bearing, open design,
horizontal mounting direction (see user
guide for details)
Bearing insulation
*
Non-insulated bearings
Non-insulated bearings
+BIN
Insulated bearing in N-end
Insulated bearing in N-end
+BIA
Insulated bearing in both
ends
Insulated bearing in both ends
Shaft grounding
*
None
+SG1
D-end shaft grounding
In-built grounding ring
Protection class
*
Standard protection class
IP65 protection class
+IP67
IP67 protection class
IP67 protection class, not available with
+BHS option
Cable direction
*
Cable direction fixed
Cable direction towards D-end
+CNE
Cable direction towards N-
end
Cable direction towards N-end
Rotation sensor (resolver)
*
None
No resolver
+RES1
Resolver
In-built non contacting resolver, 6-pole
pair
Winding temperature
sensors
*
Temperature surveillance
3 x PT100 in windings
+TEMP4
Redundant temperature
surveillance
6 x PT100 in windings
Bearing temperature
sensors
*
None
None
+BTMP1
PT-100 in bearings
Plug-in connector
Anti-condensation heaters
*
None
None
+HEAT1
One anti-condensation
heater
230VAC/65W
Marine classification
*
No marine classification
+CL1
ABS American Bureau of Shipping
+CL2
BV Bureau Veritas
+CL3
DNV
+CL4
LR Lloyd’s Register
+CL5
RINA
User Guide
EM-PMI375
General information
6 |
©
Danfoss | November 2021
BC265856307805en-000202
