Lifting lugs/eyes/points for lifting slings and lifting position of the electric machine
1 Lifting eye type of ANSI B18.15.1M M10x16 is recommended in M10 bores. Not included in the delivery.
Horizontal lifting
Install 2 pieces of lifting eyes to the lifting bores of the electric machine frame. Mount the lifting eyes with
their full threaded length.
Vertical lifting
Install 2 pieces of lifting eyes to the lifting bores in the N-end SAE flange. Lifting eye should be mounted
with its full threaded length.
Storage
Do not touch the electrical terminals when the shaft is rotated. The electrical terminals have
dangerous voltage during rotation.
Keep the electric machine on a correct base. Support the electric machine to prevent
accidental turning and falling.
•
Store the electric machine always indoors with the storage temperature above -20 ºC and the relative
humidity less than 60 %.
•
The storage should be dry, dust free and vibration free.
•
Treat the unprotected electric machine surfaces such as the shaft-end and flanges against corrosion.
Seal the cable exit holes and cooling bores for storage.
User Guide
EM-PMI375
Transportation and storage
©
Danfoss | November 2021
BC265856307805en-000202 | 33
