Danfoss EM-PMI375-T1100, User Manual

Page: 7 / 77

Bearing lubrication
* x Bearings greased for life: SKF 6211 2RS1 C3 WT (available BIN)
+BHS Bearing grease lubricated: SKF 6214 C3, Grease LGHP2
Bearing insulation
* x No insulation
+BIN SKF 6211 insulated bearing in N-end
+BIA SKF 6211 insulated bearing in both ends
Shaft grounding
* x None
+SG1 D-end shaft grounding
Protection class
* x IP65 protection class
+IP67 IP67 protection class, Not available with +BHS option
Cable direction
* x Cable direction towards D-end
+CNE Cable direction towards N-end
Rotation sensor
(resolver)
* x No rotation sensor
+RES1 In-built non contacting resolver, 6-pole pair
Winding
temperature
sensors
* x 3 x PT100 in windings
+TEMP4 6 x PT100 in windings
Bearing
temperature sensor
* x No temperature sensors
+BTMP1 PT-100 in bearings with plug in connector
Anti-condensation
heaters
* x None
+HEAT1 One 230VAC/50W anti-condensation heater
Table 4. EM-PMI375-T800 options
Feature
Option Standard
option
Explanation
High voltage
connections
* x
One connection box containing one 3 phase system with one
M25 cable gland per phase
-DUAL
2 connection boxes each containing one 3 phase system with
one M32 cable gland per phase
Mounting direction
* x Can be mounted in any direction
+MH Horizontal mounting only
N-end attachment
+NE1 x SAE 4 FH
+NE2 Male shaft + ange. DIN5480 W55x2x30 SAE 4 FH
Bearing lubrication
* x Bearings greased for life: SKF 6211 2RS1 C3 WT (available BIN)
+BHS Bearings: SKF 6211 C3, Grease: SKF LGHP2 (requires MH)
Bearing insulation
* x No insulation
+BIN SKF 6211 insulated bearing in N-end
+BIA SKF 6211 insulated bearing in both ends
Shaft grounding
* x No shaft grounding
+SG1 In-built grounding ring
EM-PMI375
1. General information
6 | © Danfoss | Produced By: Danfoss Power Solutions | January 2019
| BC265856307805en-000105