Danfoss EM-PMI375-T1100, User Manual, Page: 20 / 77

Figure 7. Overview of electric machine system
Connections and interfaces
The electric machines are connected mechanically and electrically as a part of a machinery or as a
part of a power generation equipment.
Mechanical interfaces:
Lifting points.
Flange mounting (D-end and N-end).
Shaft connection(s).
Cooling system connections (bores).
Grease escape/ ll connections; depending on model and option (BHS): maintenance use only.
Air ventilation plug.
Electrical interfaces:
Power connections through the connection box.
Measurement connections.
Anti-condensation heater(s) connector (+HEAT1).
Power grounding connection.
Low voltage (measurement signal) grounding connection.
EM-PMI375
3. Product overview
| BC265856307805en-000105
© Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 19