The electric machine can include some of the options available. The options of the electric
machine are shown also in the rating plate, following the frame model code. Note! Only options
that differ from the standard delivery are indicated. Following options are used, see Table below.
For detailed information of the models, options and characteristics, see product data sheets.
Table 2. EM-PMI375-T200 options
Feature
Option Standard
option
Explanation
N-end attachment
+NE1
x
Flange. SAE 4 FH
+NE2
Male shaft + ange. DIN5480 W55x2x30
SAE 4 FH
Bearing insulation
*
x
No insulation
+BIN
SKF 6211 insulated bearing in N-end
+BIA
SKF 6211 insulated bearing in both ends
Shaft grounding
*
x
No shaft grounding
+SG1
x
In-built grounding ring
Protection class
*
IP65 protection class
+IP67
IP67 protection class, not available with +BHS
option
Cable direction
*
x
Cable direction towards D-end
+CNE
Cable direction towards N-end
Rotation sensor (resolver)
*
x
No rotation sensor
+RES1
In-built non contacting resolver, 6-pole pair
Winding temperature
sensors
*
x
3 x PT100 in windings
+TEMP4
6 x PT100 in windings
Bearing temperature
sensors
*
x
None
+BTMP1
PT-100 in bearings with plug in connector
Anti-condensation heaters
*
x
None
+HEAT1
One 230VAC/50W anti-condensation heater
Table 3. EM-PMI375-T500 options
Feature
Option Standard
option
Explanation
High voltage
connections
*
x
One connection box containing one 3 phase system with one
M25 cable gland per phase
-DUAL
2 connection boxes each containing one 3 phase system with
one M32 cable gland per phase
Mounting direction
*
x
Can be mounted in any direction
+MH
Horizontal mounting only
N-end attachment
+NE1
x
SAE 4 FH
+NE2
Male shaft + ange. DIN5480 W55x2x30 SAE 4 FH
EM-PMI375
1. General information
| BC265856307805en-000105
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 5
Summary of Contents for EM-PMI375-T1100
Page 1: ...User Guide Motor Generator EM PMI375 danfoss com...
Page 77: ......
