Transportation
Heavy equipment. Handle with care during transportation.
Electric machine is shipped in rst class condition. It has been inspected and packed correctly to
prevent damage from ordinary handling during shipment. During transportation, shocks, fails and
humidity should be avoided. Protect the cooling holes for transportation.
The weight of the electric machine can be found on the machine rating plate, and in the product
data sheet.
Receiving and unpacking
Do not touch the electric machine during the insulation resistance check. Discharge the electric machine afterwards.
Do not touch the electrical terminals when the rotor is rotated. The electrical terminals have dangerous voltage during
rotation. Contact Danfoss representative if the rotor can't be rotated.
Check upon arrival and unpacking
The electric machine and the package must be inspected immediately upon arrival. Make
sure that the rating plate data in the cover letter complies with the purchase order. Any
external damage (in shaft-ends, anges, electrical interfaces and paint) must be photographed
and reported immediately.
It is recommended to measure the insulation resistance of the machine upon arrival, or before
installing the electric machine. Reference value of 150 MΩ shall be exceeded in room
temperature, otherwise contact Danfoss representative.
Remove any shaft locks and rotate the shaft by hand. It is normal for the rotation of the shaft to
be difficult.
EM-PMI375
5. Transportation and storage
| BC265856307805en-000105
©
Danfoss | Produced By: Danfoss Power Solutions | January 2019 | 29
Summary of Contents for EM-PMI375-T1100
Page 1: ...User Guide Motor Generator EM PMI375 danfoss com...
Page 77: ......
