Danfoss DHP-M, Commissioning

Page: 7 / 40

Caution
When filling the coolant system the coolant pump must be operating;
you must ensure that the compressor and the heat transfer pump can-
not start.
Caution
This appliance is intended for use by expert or trained users in shops,
in light industry and on farms, or for commercial use by lay people.
Caution
In accordance with EN60335-2-40, this product is classified as "not
available to the general public." This means that the product is de-
signed to be handled by trained staff and installed in an engine room
or similar.
Caution
Isolate the power supply to the heat pump while servicing the appli-
ance or replacing parts.
Caution
Only spare parts approved by Danfoss Värmepumpar may be used for
this appliance.
N
In normal operation the heat pump generates noise and vibrations.
The appliance should be set up and connected in accordance with the
instructions in order to avoid noise being spread to noise-sensitive
areas.
2.2 Refrigerant
2.2.1 Refrigerant
Caution
Work on the refrigerant circuit must only be carried out by a certified
refrigeration engineer.
Although the heat pump's cooling system (refrigerant circuit) is filled with a chlorine-free and environmentally-approved refrigerant that
will not affect the ozone layer, work on this system may only be carried out by authorised persons.
Commissioning DHP-M
Danfoss Heating Solutions VIJSE302
7