Danfoss DHP-M, Commissioning

Page: 27 / 40

Set the heat pump to the desired operating mode in the menu:
1. Press on the Start screen to open the Menu screen.
2. Press
. A new window opens.
3. Press the appropriate symbol for the desired operating mode.
Symbol Description
Operating mode Off. All functions off.
Components inside are still current carrying.
Operating mode Off. All functions off.
Auxiliary heater enabled but not activated.
Components inside are still current carrying.
Operating mode Service. All internal functions off.
Components inside are still current carrying.
External functions are on.
In this operating mode the heat pump is deactivated and will not produce hot water or heat-
ing.
Operating mode Auxiliary service.
External functions are on.
Auxiliary heater enabled but not activated.
In this mode the heat pump (compressor) is disabled, but the unit can produce heating and
hot water with the internal immersion heater (and/or external auxiliary heater if activated).
This operating mode must be used if heating and/or hot water is needed, but the compres-
sor must be disabled e.g. when the brine circuit is not available or installed.
Operating mode Auxiliary service.
External functions are on.
Auxiliary heater enabled and activated.
In this mode the heat pump (compressor) is disabled, but the unit can produce heating and
hot water with the internal immersion heater (and/or external auxiliary heater if activated).
This operating mode must be used if heating and/or hot water is needed, but the compres-
sor must be disabled e.g. when the brine circuit is not available or installed.
Commissioning DHP-M
Danfoss Heating Solutions VIJSE302
27