39
VMBMA602
11 Customer information
After installation and test operation, the customer must be
informed about their new heat pump installation. Below is a check-
list regarding the information that the installer must give the cus-
tomer:
• The model of the heat pump that has been installed
• Run through the Maintenance instructions and show what it con
-
tains
• Describe the various operating modes and what they mean
• Describe the most common alarms and corrective actions
• Demonstrate how to navigate the control computer and which
settings the customer can set themselves
• Demonstrate how to view history and operating times
• Show the pipe installation and go through the periodic mainte
-
nance actions that the customers must be aware of:
- recommended pressure on manometers
- fill the heating system
- exercise safety valves
- clean strainers
• Explain how the customer can fine adjust their existing heating
system according to the instructions in the maintenance instruc-
tions
• The applicable warranties
• Where is the customer to turn for servicing
• Finally, fill in the reference list at the back of the Maintenance
instructions.
Summary of Contents for DHP-H
Page 1: ...VMBMA602 Installation and Service instructions DHP H DHP L DHP A DHP AL DHP C...
Page 95: ......
Page 96: ......