![background image](http://html1.mh-extra.com/html/danfoss/control-c-2/control-c-2_operators-manual_3398135004.webp)
Contents
1
About this document ........................................................................................... 6
1.1
Storage .......................................................................................................... 6
1.2
Figure presentation ........................................................................................ 6
1.3
Abbreviations ................................................................................................. 7
1.4
Accessories ................................................................................................... 8
2
Safety instructions ............................................................................................... 9
2.1
Presentation of warning notes ....................................................................... 9
2.2
Safety instructions ......................................................................................... 9
2.1
Use in compliance with intended purpose ..................................................... 9
3
Control description ............................................................................................ 11
Operation and display elements .................................................................. 11
Foot pedal (accessory) ................................................................................ 12
Operation modes ......................................................................................... 12
Control operation ......................................................................................... 14
5
Crimp using workpiece table ............................................................................ 17
Start screen ................................................................................................. 17
Select workpiece specification ..................................................................... 18
Verify and adjust settings ............................................................................ 21
6
Crimp without workpiece table ......................................................................... 24
Start screen ................................................................................................. 24
Manual operation ......................................................................................... 25
Semi-automatic operation ............................................................................ 27
Form to a diameter ........................................................................... 28
Form to a pressure value (only PFM and PFC) ................................ 33
Operating pressure and counter settings ......................................... 38
Load data record from database. ..................................................... 39
Load data record using a scanner (option) ....................................... 40
7
Control settings ................................................................................................. 42
User log in ................................................................................................... 42
Data base .................................................................................................... 43
Data management with a USB storage medium .......................................... 44