the forming process, the left foot switch is used to open the
tool.
–
Depth stop
The tool is closed automatically when the workpiece acti-
vates the depth stop by pressure. Press the
button to
open the tool.
As soon as the forming diameter or forming pressure defined in
the control is reached, the tool stops automatically.
•
Semi-automatic operation
is activated in the control. The forming process is started
manually via the buttons on the control panel or external but-
tons, e.g. the dual foot switch:
–
Close tool button
–
Dual foot switch
The right foot switch is used to close the tool.
–
Depth stop
The tool is closed automatically when the workpiece acti-
vates the depth stop by pressure.
As soon as the forming diameter or forming pressure defined is
reached in the control, the tool stops and opens automatically.
Production is possible in any operation mode.
The operation mode selected before deactivating the machine will
be active upon a restart. The operation modes are set on the con-
trol panel.
When the Foot switch button
is activated, the Close tool but-
ton
is inoperative, even if it is illuminated.
