To mount the cable to the terminal:
1. Strip isolation of 9-10 mm
2. Insert a screw driver in the square hole.
3. Insert the cable in the adjacent circular hole.
4. Remove the screw driver. The cable is now
mounted to the terminal.
To remove the cable from the terminal:
1. Insert a screw driver in the square hole.
2. Pull out the cable.
• Basic Wiring Example
1. Mount terminals from the accessory bag to
the front of the CD 302.
2. Connect terminals 18, 27 and 37 to +24 V (ter-
minal 12/13)
Default settings:
18 = start
27 = coast inverse
37 = safe stop inverse
Instructions
6 | AN000086420674en-000201
© Danfoss | DCS (CC) | 2019.04