26
Manual RS8EF402 © Danfoss 02-2009
AK-SM 350 Version 1.7x
Signal type
This is where you set whether it is a voltage signal or a current
signal.
unit
This is where you set the name of the signal.
Readout at max. signal
This is where you set the value that will be presented when the
input signal is at its highest (max. 10 V or 20 mA).
Readout at min. signal
This is where you set the value that will be presented when the
input signal is at its lowest (min. 0 V or 4 mA).
The following settings only apply if "Analogue input" was selected in
point 3.
Analogue input - AI
This list of settings was
previously covered under
temperature. Please see the
explanation on pages 24-25.