34
Manual RS8EF402 © Danfoss 02-2009
AK-SM 350 Version 1.7x
Night alternate destination
If the alarm cannot be transmitted to the primary des-
tination, it will be sent to the alternate destination.
This destination can be, for example, a service company, which
will acknowledge night-time alarms, but only if there is no contact
with destination 1.
Night copy xx
This destination will receive a copy of all the alarms sent.
Here an SMS destination has been selected.
Day night mode
This is where alarms are divided up so they are sent to one place
at the store’s opening time and somewhere else at the closing
time.
In this example, "Yes" is selected. (With the setting = "Yes", the
bottom five lines are visible in "Route display". The lines contain
"Night functions".)
Primary destination
In this example, "Buzzer" is chosen, i.e. the internal buzzer is acti-
vated if alarms go off at the opening time.
Alternate destination
(In this example no alternate destination is selected for the open-
ing time.)
Copy 1
In this example we are choosing to send a copy of the alarm to a
service company (Remote destination no. xx).
In the store’s closing period:
Another set of destinations are set for the closing period. They are
as follows:
Night — PrImary dest.
This destination can be a monitoring centre which acknowledges
night-time alarms. (The choice of settings is greater than shown
here. The complete list can be viewed above in the "Primary desti-
nation" display.)