AK-LM 350
RS8GX102 © Danfoss 10-2013
51
Thermostats
The general thermostats can be used to monitor
the temperature
.
For each thermostat set / readout
• Name
• Which of the sensors is used
• Actual temp.
Temperature measurement on the sensor that is
attached to the thermostat
• Used relay output
Define whether a relay will be used for this ther-
mostat function.
• Actual state
Actual status on the thermostat outlet
• Cut out temp.
Cut-out value for the thermostat
•
Cut in temp.
Cut-in value for the thermostat
• DI for def. Interlock
DI signal, which will change the delay time to
“High Alarm delay 2”
• DI for disable alarms
DI signal, which cancels alarms
•
High alarm limit
High alarm limit
•
Alarm delay high
Time delay for high alarm
• High alarm delay 2
Current delay time when there is a signal on “DI for
def. Interlock”
•
Alarm text high
Indicate alarm text for the high alarm
•
Low alarm limit
L
ow alarm limit
•
Alarm delay low
Time delay for low alarm
•
Alarm text low
Indicate alarm text for low alarm
Pressostats
The general pressostats can be used to monitor
the pressure
(Abs. pressure)
For each pressostat set / readout
• Name
• Which of the sensors is used
• Actual pressure.
Pressure reading on the sensor connected to the
pressure switch
• Used relay output
Define whether a relay is to be used for this pres-
sure switch function
• Actual state
Actual status on the
pressostat outlet
• Cut out pressure
Cut-out value for the pressostat
• Cut in pressure
Cut-in value for the pressostat
•
High alarm limit
High alarm limit
•
Alarm delay high
Time delay for high alarm
•
Alarm text high
Indicate alarm text for the high alarm
•
Low alarm limit
L
ow alarm limit
•
Alarm delay low
Time delay for low alarm
•
Alarm text low
Indicate alarm text for low alarm
Thermostat functions
We have not used this function in our
example. The image is included for guidance
only.
The name of the function may be xx and
further down in the display the alarm texts
may be entered.
We have not used this function in our
example. The image is included for guidance
only.
The name of the function may be xx and
further down in the display the alarm texts
may be entered.
Pressostat functions
Configuration - continued