![background image](http://html1.mh-extra.com/html/dane-technologies/wm2000/wm2000_owners-manual_3373015040.webp)
Dane Technologies, Inc.
WheelChair Mover
Owners Manual
40
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
Using a knife or other tool remove the plastic cap on the RH side of the caster and
then remove the nut, push out the bolt and other cap, and then remove the wheel.
Using a 3/4” socket, remove the bolt holding the caster to the frame.
Remove the old caster and install the new one. Tighten the bolt holding the caster to
the frame to 60 ft-lbs torque.
Reverse this procedure to assemble the caster.
Raise the machine upright.
Insert the red service maintenance key and turn on the switch. Turn on the machine
and test it for correct operation.
6) If the batteries need to be replaced, follow this procedure:
Caution:
Batteries are heavy. Always use care and proper
lifting technique to avoid injury when removing or
replacing batteries.
Turn off the red service maintenance switch and remove the key.
Remove the back cover. Refer to the battery wiring label on the inside of the back
cover.
Remove cap,
then nut and
bolt
Remove caster
swivel bolt last