![background image](http://html1.mh-extra.com/html/danalock/btzes-100/btzes-100_quick-start_3355465004.webp)
4
(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, www.zwaveeurope.com
Value
Description
1 — 100
factor 10; 1 = 10°; 72 = 720° = 2 turns (Default 9)
Auto Latch Time Delay (Parameter Number 5, Parameter Size 1)
parameter defines amount of seconds after
opening the door automatically locks again
Value
Description
0
Disabled (Default)
1 — 60
delay after opening in seconds
Sound setup (Parameter Number 6, Parameter Size 1)
parameter defines if an acoustic signal confirms
latch/unlatch operations
Value
Description
0
Latch/unlatch Sound disabled
1
Latch/unlatch Sound enabled (Default)
Battery Type (Parameter Number 7, Parameter Size 1)
parameter defines the battery type (voltage) is used to
power the device; value shouldn't be changed!
Value
Description
0
3.6 volt battery type (Default)
1
3.0 volt battery type
Battery Alarm Value Threshold (Parameter Number 8, Parameter Size 1)
parameter defines the percent
battery status threshold underrun which leads to an acoustic signal after latch/unlatch operations
Value
Description
0 — 100
0-100% (Default 30)
Technical Data
Battery Type
1 * 3.6V Lithium Battery
Frequency
868.42 MHz (SRD Band)
Wireless Range
up to 100 m outside, on average up to 20 m inside buildings
Explorer Frame Support
No
SDK
5.02 pl3
Device Type
Slave with routing capabilities
Generic Device Class
Entry Control
Specific Device Class
Advanced Door Lock