THUMB TURN
ASSEMBLY
LATCH MOUNTING PLATE
LATCH
DEADBOLT
STRIKE
WOOD FRAME
REINFORCER
DUST BOX
MOUNTING SCREWS
F OR USE ON DOORS 1-3/8" to 1-3/4"
(35mm-45mm) THICK
TOOLS REQUIRED FOR NEW INSTALLATION:
(1) Phillips Head Screwdriver
(1) 2-1/8" (54mm) Hole Saw
(1) 1" (25.4mm) Drill Bit
(1) Chisel
TOOLS REQUIRED FOR REPLACEMENT INSTALLATION:
(1) Phillips Head Screwdriver
FOR REMODELING OR NEW CONSTRUCTION:
- Follow all steps
3221 Thumbturn Only Deadbolt
Installation Instructions
FOLD HERE
ON DOOR EDGE
1-3/8"
35
45
1-3/4"
T E MP L AT E
1-9/16"
40
CAUTION
：
DO NOT DRILL 2-1/8" (54mm) HOLE
THROUGH TO OPPOSITE SIDE OF DOOR.
(READ INSTRUCTIONS CAREFULLY)
2-1/8" (5 mm) HOLE
4
Make 1"(25.4mm) hole at center
of door edge.
2-3/8" ( 60mm
)
BACKSET
2-3/4" ( 70mm
)
BACKSET
1. MARK DOOR
2. DRILL HOLES
3. PREP DOOR
2-1/8" (54mm) HOLE
1-3/16" (31mm) DEEP
1"(25.4mm) HOLE
4-1/8"(105mm)
DEEP
DOOR FACE
DOOR EDGE
2-1/8" (54mm) HOLE
1-3/16" (31mm) DEEP
1"(25.4mm) HOLE
4-1/8"(105mm)
DEEP
DOOR FACE
DOOR EDGE
2-1/8" (54mm) HOLE
1-3/16" (31mm) DEEP
1"(25.4mm) HOLE
4-1/8"(105mm)
DEEP
DOOR FACE
DOOR EDGE
2-1/8" (54mm) HOLE
1-3/16" (31mm) DEEP
1"(25.4mm) HOLE
4-1/8"(105mm)
DEEP
DOOR FACE
DOOR EDGE
Measure center line of lock; height as desired from finished floor.
Select 2-3/4" or optional 2-3/8" backset, fold and apply template
to interior side of door and mark center of door as indicated on
template. Mark center hole on door face through guide on template.
(See Step 7 for changing latch backset)
Drill 1" (25.4 mm) hole
4-1/8" (105 mm) deep
in center of door edge.
Drill 2-1/8" (54mm) hole
1-3/16" (31 mm) deep
on interior door face.
CAUTION:
Do not drill completely through the door face.
Insert latch in hole, keeping latch face parallel to
face of door edge.
Mark outline and remove latch.
Chisel 5/32" (4 mm) deep or
until latch face is flush with door edge.
Refer to Step 5 & 6 when installing latch.
a.
b.
c.
TEMPLATE
7/28/08
HAGER COMPANIES
139 Victor Street, St. Louis, MO 63104 (800) 325-9995 FAX (800) 782-0149
