Dan Dugan Sound Design E-2A User Manual Download | Manualshive

Page: 2 / 84

background image

Important Safety Instructions and Warnings

The Model E-2A’s circuitry is made in the USA and meets applicable national safety standards.

Standards Compliance

The third-party power supply provided with this product has been certified to comply with UL
and CE.

Safety Instructions

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

Do not use this apparatus near water.

6. WARNING!

To reduce the risk of fire or electric shock, do not expose this apparatus

to rain or moisture.

7.

Clean only with dry cloth.

8.

Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.

9.

Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

10.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

11.

Protect the power cord from being walked on or pinched particularly at plugs, conve-
nience receptacles, and the point where they exit from the apparatus.

12.

Only use attachments/accessories specified by the manufacturer.

13.

Unplug this apparatus during lightning storms or when unused for long periods of time.

14. WARNING!

Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. WARNING!

To reduce the risk of electric shock, DO NOT REMOVE COVER. No

user serviceable parts inside.

«
1
2
3
4
...
»

Summary of Contents for E-2A





















































































Reviews:

No comments

Related manuals for E-2A

WJHD309A - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 79

Brand: A.MENARINI Pages: 2

Brand: JB-Lighting Pages: 40

Brand: Paia Pages: 11

Brand: CAB Pages: 39

Brand: Tabi Pages: 8

Brand: Dabi Atlante Pages: 102

Brand: Datavideo Pages: 28

Lab companion SI-300

Brand: Jeio tech Pages: 69

IP Video Test Option HST-3000

Brand: JDS Uniphase Pages: 4

Brand: Jct Pages: 16

SC 2 Deluxe EasyFix

Brand: Kärcher Pages: 12

Brand: Kärcher Pages: 16

Brand: Malekko Pages: 2

Brand: Major Pages: 26

HQ Power VDL25BM

Brand: Velleman Pages: 3

Brand: iGuzzini Pages: 36

AQUIS ULTRAFLOW

Brand: Waterous Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands