Dan Dugan Sound Design E-2A User Manual Download

Page: 65 / 84

Dugan Model E-2A User Guide

Front Panel

Eight Channels Screen

The screen has three navigable sections, each discussed below.

Figure 9-3

Eight Channels screen with channel 1’s

weight

control highlighted

The top row items are functionally

above

the channel controls, and the double arrows

are

below

them. Figure 9-4 has been altered to better illustrate how to navigate on this

screen.

Figure 9-4

Altered Eight Channels screen clarifies how to navigate the controls

TIP:

Press the left and right arrow navigation buttons together to jump to the double arrows
from anywhere on the screen.

Top Row

MENU, ALL CH

, and

MASTER

jump to their respective screens.

To change the meter display in the control panel:

Use the navigation arrow buttons to highlight the meter selection

in the top row.

It will read

GAINS

INPUTS

, or

OUTPUTS

To change the meter mode, turn the knob.
The display changes without pressing the knob. When finished, use the navigation

arrows to continue editing other parameters.

Summary of Contents for E-2A





















































































Search results

Summary of Contents for E-2A

Reviews:

Related manuals for E-2A

Brands by name

Popular brands

Dan Dugan Sound Design E-2A, User Manual

Search results

Summary of Contents for E-2A

Reviews:

Related manuals for E-2A

Brands by name

Popular brands