76
Spyder3 S3-14 and S3-24 Monochrome Camera User's Manual
03-032-20117-01
Teledyne DALSA
Message
Description
Warning 01: Ou tsid e of sp ecification>
Param eter accep ted w as ou tsid e of sp ecified op erating range (e.g. gain
greater than ±10 d B of factory setting).
Warning 02: Clip p ed to m in>
Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see
valu e u sed .
Warning 03: Clip p ed to m ax>
Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see
valu e u sed .
Warning 04: Related p aram eters ad ju sted >
Param eter w as clip p ed to the cu rrent op erating range. Use
gcp
to see
valu e u sed .
Warning 07: Coefficient m ay be inaccu rate
A/ D clip p ing has occu rred >
In the region of interest (ROI) greater than 6.251% single or 1% of
averaged p ixel valu es w ere zero or satu rated .
Warning 08: Greater than 1% of coefficients
have been clip p ed >
A FPN / PRN U has been calcu lated to be greater than the m axim u m
allow able 511 (8).
Warning 09: Internal line rate inconsistent
w ith read ou t tim e>
Message
Description
Error 02: Unrecognized com m and >
Com m and is not available in the cu rrent access level or it is not a valid
com m and .
Error 03: Incorrect nu m ber of p aram eters>
Error 04: Incorrect p aram eter valu e>
This resp onse retu rned for
·
Alp ha received for nu m eric or vice versa
·
N ot an elem ent of the set of p ossible valu es. E.g., Bau d Rate
·
Ou tsid e the range lim it
Error 05: Com m and u navailable in this
m od e>
Com m and is valid at this level of access, bu t not effective. Eg line rate
w hen in sm art Exsync m od e
Error 06: Tim eou t>
Com m and not com p leted in tim e. Eg FPN / PRN U calcu lation w hen no
external Exsync is p resent.
Error 07: Cam era settings not saved >
Tried saving cam era settings (
rfs
/
rus)
bu t they cannot be saved .
Error 08: Unable to calibrate - tap ou tsid e
ROI>
Cannot calibrate a tap that is not p art of the region of interest.
Error 09: The cam era's tem p eratu re exceed s
the sp ecified op erating range>
Ind icates that the cam era has shu t itself d ow n to p revent d am age from
fu rther overheating.
