28
User Manual, Rev 02
Rad-icon 2329 GigE Detector
Teledyne DALSA
Camera Information
The following table describes the parameters Display Name as shown in CamExpert
and their feature name, accessibility (RO=ReadOnly, RW=Read/Write,
WO=WriteOnly) and description.
Display Name
Feature
Acc Description
Manufacturer Name
DeviceVendorName
RO
Displays the device vendor name
ModelName
DeviceModelName
RO
Displays the device model name
Device Version
DeviceVersion
RO
Displays the device firmware
version. This tag will also
highlight if the firmware is a beta
or custom design
Manufacturer Info
RO
Displays the type of the design
Hardware Revision
HardwareRevision
RO
Processing board hardware
revision
Serial Number
DeviceID
RO
Displays the device’s f
actory set
camera serial number
MAC Address
deviceMacAddress
RO
Displays the unique MAC (Media
Access Control) address
Device User ID
DeviceUserID
RW Feature to store a user-
programmable identifier of up to
15 characters. The default factory
settings is empty
Device Reset
DeviceReset
WO Resets the device to its power up
state.
Device Temparature
Detector Temperature
RO
The temperature on the
processing board in degrees
Celcius
Timing Version
Sensor timing settings
version
RO
Displays the sensor timing
settings version on the detector
Power-up Configuration
Selector
UserSetDefaultSelector
RW Selects the camera configuration
set to load and make active on
camera power-up or reset. The
camera configuration set is stored
in camera non-volatile memory
(RW)
Factory Setting
FactorySetting
Load the factory default feature
settings
UserSet1
UserSet1
Select the user defined
configuration UserSet1 as the
Power-up Configuration
UserSet2
UserSet2
Select the user defined
configuration UserSet2 as the
Power-up Configuration
User Set Selector
UserSetSelector
RW Selects the camera configuration
set to load feature settings from
or save current feature settings
to. The Factory set contains
default camera feature settings
