User Manual, Rev 01
13
Teledyne DALSA
Rad-icon 2329 GigE Detector
Keep leads as short as possible in order to reduce voltage drop. The voltage level at
the product power connector should be within the range mentioned in the datasheet.
Use high-quality linear supplies of SELV type and EN 60601-1 compliant.
Note: If your power supply does not meet these requirements, the detector
performance specifications cannot be guaranteed.
Trigger Connector
The trigger circuitry inside the detector is shown in the figure below.
FPGA
4pin LEMO
Connector
1
2
3
4
TCMT1600
Trigger Input Anode +
Trigger Input Cathode -
Trigger Output Col
Trigger Output Emitter -
TCMT1600
680
1
0
k
100
BAT54J
100p
100p
680
.
Description
1
Out
Optocoupler collector with 680R +100R (+/- 2%)
series resistor (note 1)
2
Out
Optocoupler emitter
3
In
Optocoupler anode with 680R (+/- 2%) series resistor
(note 2)
4
In
Optocoupler cathode
Shielding (chassis)
Note 1: maximum voltage across collector and emitter is 70V. Maximum reverse voltage (between
emitter and collector) is 6V
Note 2: maximum reverse voltage across cathode and anode is 6V.
1
Pin 1 indicator
2
3
4
Rear View
Plug
I/O Connector
