Piranha4 2K and 4K Color Camera User's Manual
11
Teledyne DALSA
03-032-20180-06
Supported Industry Standards
GenICam™
Piranha4 cameras are GenICam compliant. They implement a superset of the GenICam™ Standard
Features Naming Convention specification V1.5. This description takes the form of an XML device
description file respecting the syntax defined by the GenApi module of the GenICam™ specification. The
camera uses the GenICam™ Generic Control Protocol (GenCP V1.0) to communicate over the Camera
Link serial port. For more information see
Sensor Responsivity and Design
Responsivity
The responsivity graph illustrates the sensor’s response to different wavelengths of light (excluding lens
and light source characteristics).
Note
: The responsivity of a color camera will measure approximately 1/6
th
that of a similar monochrome
camera model as a result of the effect the color filter has on the sensor and also due to the color camera
not incorporating TDI Mode.
0
200
400
600
800
1000
1200
350
450
550
650
750
850
950
Sp
e
c
tra
l
R
e
s
p
o
n
s
iv
it
y
(D
N
/
n
J
/
c
m
²)
Wavelength (nm)
2K Trilinear Color Spectral Responsivity
No White Balance, 12 Bit, 1x Gain
Red
Green
Blue
Figure 1: 2k Trilinear Spectral Responsivity