68
Piranha4 2K and 4K Camera Color User's Manual
03-032-20180-06
Teledyne DALSA
Deca RGB8
Max: 70KHz
Or
Rate =
40000000
AOI AOI AOI AOIwidth4
0.3 x (
)
Set Exposure Time
To set the camera’s exposure time, use the
Exposure Time
parameter—a member of the Sensor Controls
set. This feature is only available when the
Exposure
Mode
parameter is set to
Timed
. The allowable
exposure range is from 7 µs to 3,000 µs, dependent on the value of the internal line rate.
GenICam parameters:
Sensor Controls > Exposure Time (Timed Exposure Mode) > 8 µs to 3,000 µs.
Control Gain and Black Level
The cameras provide gain and black level adjustments in the digital domain for the CMOS sensor. The
gain and black level controls can make small compensations to the acquisition in situations where
lighting varies and the lens iris cannot be easily adjusted. The user can evaluate gain and black level by
using CamExpert.
The parameters that control gain and black level are grouped together in the Sensor Controls set.
Sensor Controls
Black Level
Apply a digital addition after an FPN correction: ± 1/8 of the available range of
-32 to +31 in 8-bit mode, -128 to +127 in 10-bit mode, and -512 to +511 in 12-bit
mode.
Gain
Set the gain as an amplification factor applied to the video signal across all
pixels: 1x to 10x.
Set Image Size
To set the height of the image, and therefore the number of lines to scan, use the parameters grouped
under the Image Format Control set.
Image Format Control
Control the size of the transmitted image
Width
Width of the image.
Height
Height of the image in lines.
Pixel Format
8 bit depth to Camera Link.