8
•
The Piranha XL Camera
Certification & Compliance
Compliance
EN 55011, FCC Part 15, CISPR 11, and ICES-003 Class A Radiated Emissions Requirements
EN 55024 and EN 61326-1 Immunity to Disturbance
RoHS per EU Directive 2011/65/EC and WEEE per EU Directive 2002/96/EC and China Electronic Industry Standard
SJ/T11364-2006
Supported Industry Standards
GenICam™
The Piranha XL camera is GenICam compliant and implements a superset of the GenICam Standard
Features Naming Convention specification V1.5.
This description takes the form of an XML device description file using the syntax defined by the
GenApi module of the GenICam specification. The camera uses the GenICam Generic Control
Protocol (GenCP V1.0) to communicate over the Camera Link HS command lane.
For more information see www.genicam.org.
Camera Link HS
The Piranha XL camera is Camera Link HS version 1.0 compliant. Camera Link HS is the next
generation of high performance communications standards and is used where a digital industrial
camera interfaces with single or multiple frame grabbers with data rates exceeding those supported
by Camera Link. The Piranha XL camera includes two Camera Link HS compatible connectors, each
capable of supporting data rates up to 2.1 Gbytes / sec per second. Each connector can also
interface with standard ‘CX4 Active Optical Cable’ fiber modules where very long data transmission
is required—up to 300 meters.
RXC
TXC
TX1
TX2
TX3
TX4
TX5
TX6
TXC
RXC
RX1
RX2
RX3
RX4
RX5
RX6
Data Lane 6
Data Lane 0
Command
Channel
Video
Channel
Link
Camera
(C2,7M1)
Frame Grabber
(C2,7M1)
Figure 2. Piranha XL Single CLHS Connector Configuration
