32
Operational Reference
Genie Color Series-GigE Vision Camera
Read Only Parameters
Parameter
Description
Device Vendor
For the Genie color series, this is always DALSA.
Device Model Name
Displays the device model name (for example, Genie C1024).
Device Version
Displays the device version which includes the firmware release and build.
Firmware Version
Displays the currently loaded firmware version manufacturer's code.
Device ID
Displays the camera serial number.
MAC Address
Displays the unique MAC (Media Access Control) address of the Genie camera.
User Set Parameters
Parameter
Description
Device User ID
Specifies a user written ID, of up to 15 characters, for the Genie camera.
By default, this field is set to the serial number of the camera.
Power-up Configuration
Click
Setting
to open the
Power-up configuration
dialog box which allows you to specify
camera power-up configuration.
For more information, see
"
Power-up Configuration
" on page 32
.
Power-up Configuration (Saved User Settings)
The
Power-up configuration
dialog allows you to specify the camera configuration to load when powering-up the
camera. The Genie camera flash memory contains two possible configuration settings; the Factory Default (neutral
parameters and in free run mode), and a user-defined Camera Configuration 1. The
Camera Power-up
configuration
drop-down list box allows you to select either the Factory Default or a user specified camera
configuration file. To save the current CamExpert settings to the camera user-defined (Camera Configuration)
setting, click
Save
. To view in CamExpert a camera configuration file currently saved in the camera, select the
configuration file in the
Load configuration from Camera
drop-down list, and click
Load
.
