DDF4220HDV Picodome
®
www.dallmeier.com
8
3 General Notes
3.1
Scope of Delivery
Included in the standard scope of delivery is:
1× DDF4220HDV Picodome
®
IM or SM (depending on the product ordered)
1× Documentation “Configuration” (published on DVD-ROM)
1× Documentation “Installation” (published in print and on DVD-ROM)
1× Drilling template (published in print and on DVD-ROM)
In addition, all screws, dowels and special tools necessary for a proper installation of the
ordered device variant are included.
The scope of delivery may differ depending on the ordered equipment, device variant or
country of destination.
The functional range of the devices depends on the ordered equipment or device variant
and may differ from this document’s content.
Certain functions and features may require the purchase of an additional license.
3.2
Transportation and Packaging
Store the original packaging for later transportation.
Dallmeier is not responsible for any damage resulting from unprofessional/improper trans-
portation.
The goods should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufficiently
protects the units against damage, moisture, heat and cold.
3.3
Warranty
The terms and conditions valid at time the contract was signed shall apply.
3.4
Appropriate Use
DDF4220HDV Picodome
®
IM
The DDF4220HDV Picodome
®
IM (in-ceiling mount variant) is a hybrid 1.3-megapixel HD
network camera built into a vandal-resistant (IK10) dome enclosure.
It is exclusively designed for indoor installations in suspended ceilings or drywall
(plasterboard) systems and can be powered via PoE (Power over Ethernet Class 0,
IEEE 802.3af) or supplied with 12 V DC (separate power supply unit required).
DDF4220HDV Picodome
®
SM
The DDF4220HDV Picodome
®
SM (surface mount variant) is a hybrid 1.3-megapixel HD
network camera built into a vandal-resistant (IK10) dome enclosure.
It is designed for indoor installations on ceilings and walls and can be powered via PoE
(Power over Ethernet Class 0, IEEE 802.3af) or supplied with 12 V DC (separate power
supply unit required).
