DDF4220HDV Picodome
®
www.dallmeier.com
43
8.3
Exposure Control
Using the exposure control allows you to adjust the automatic exposure metering of the
camera.
Open the
exposure control
dialogue via
Video
>
exposure control …
.
Fig. 8-5
Note the explanations below.
Set the relevant options.
Confirm with
oK
.
exposure Mode
•
Automatic
The entire image is used for exposure metering.
This setting is only recommended if the entire image section is illuminated homogene-
ously.
•
Center
(centre-weighted metering, default setting):
With this exposure metering option, the centre image section is prioritized over the
outer image areas.
This setting is recommended in case the relevant image details are primarily located in
the centre of the image rather than the outside margins of the image.
