DDF4220HDV Picodome
®
www.dallmeier.com
23
Edit/Delete User
Ensure that the
Login mode
is set to
User login
.
Open the
User groups
dialogue via
common settings
>
User management
>
User groups ...
.
Select the tab of the relevant group.
Select the relevant user from the users list.
edit
or
Delete
the user by clicking the related button.
6.4.1.3
LDAP Login
This setting allows for the centralized user management with LDAP (Lightweight
Directory Access Protocol) using an Active Directory (AD) service (such as
Microsoft Windows Server or Linux server with Samba).
The individual user rights/permissions are granted by three different group policies de-
fined on the LDAP client (this device).
Notice
In the
LDAP login
mode, a login as a local user group or a local user is
no longer possible.
The following LDAP settings should only be performed by an administrator
with advanced skills in LDAP technology.
In order to be able to set the respective group policies/rights on the LDAP client (this de-
vice), each LDAP user intended to obtain access to the device must first be assigned to
a specific LDAP group on the LDAP server. Then, the defined LDAP group (user-group-
relation) can be read out by the LDAP client (this device).
A valid LDAP group name for each directory entry on the LDAP server must be structured
as follows:
[Group prefix][Group suffix]
The group prefix is a user-definable expression (for example,
myhostname
), however, it
is required.
This allows administrators to assign different user groups and, thus, variable user rights to
multiple simultaneously installed LDAP clients of the same system design (e.g. Dallmeier
cameras described here).
The available group suffixes are fixed expressions:
Group 1 (Administrator):
_G4
Group 2 (User):
_G2
Group 3 (Guest):
_G1
