DDF4220HDV Picodome
®
www.dallmeier.com
46
8.5
Encoder Settings
The video encoding is configured in the
encoder settings
dialogue.
Furthermore, the hybrid video output (video over IP and the simultaneous analogue video
output) can be configured.
This dialogue may be locked by external devices/applications.
Note that the produced camera images can be recorded in “Motion” recording mode (im-
age comparison) by Dallmeier recorders of the DMS and VNB series (as of version 7.1.1).
Encoder 1 is used for this purpose and has to be set for H.264 encoding.
Encoder 2 and 3 are, then, automatically disabled.
In addition to recording, a second stream from Encoder 1 can be used for live display if
Encoder 1 is set to a bit rate not higher than 6 Mbps.
8.5.1
Encoder 1
Open the
encoder settings
dialogue via
Video
>
encoder settings ...
.
The
encoder 1
tab is displayed.
Fig. 8-7
Note the explanations below.
Select the encoding standard (H.264 or MJPEG) from the
drop-down list
encoder mode
.
Select the frame rate from the drop-down list
Frames/Second
.
Select the
Resolution
(width × height in pixels).
Note:
In order to achieve ideal image quality when recording the analogue video sig-
nal, the resolutions SXGA− or 4CIF are recommended for Encoder 1.
The resolution 720p for Encoder 1 is not recommended when recording the analogue
video signal.
Select the
Bitrate
.
Select the
Bitrate mode
.
Select the
GoP-size
(only with H.264).
Use the
Hybrid cam
checkbox to define the maximum available frame rates of
Encoder 1 and the analogue video output.
Use the
Scale Analog output
checkbox to define the scaling behaviour for the ana
-
logue video output.
Confirm with
oK
.
