dallmeier DDZ5200HD Series, Manual

Page: 27 / 80

27
COMMISSIONING – DDZ5200HD Outdoor Series | REV. 1.0.0 | © 2021 Dallmeier
Required Tools
The following tools are required for mounting the device:
•
Hexagon socket screw key (wrench size 5; included in delivery)
•
Torque screwdriver (3.8 Nm) with hex bit (size 4 mm) for hexagon socket
screws
•
Spirit level
The device can be mounted on either the optionally available
Mountera® Wall Bracket or the Mountera® Ceiling Bracket.
The individual mounting steps differ only marginally.
In the following, the mounting of the device on the Mountera® Ceiling
Bracket is described.
Fig. 3:
Mountera® Ceiling Bracket with internal cable routing and
pre-assembled internal safety cable (secondary safety component – supplied with bracket)