dallmeier DDZ5200HD Series, Manual

Page: 26 / 80

26
COMMISSIONING – DDZ5200HD Outdoor Series | REV. 1.0.0 | © 2021 Dallmeier
9 Mounting, Connection and Commissioning
Mounting, connection and commissioning of the device may only be carried
out by qualified personnel.
When mounting (or removing) the device, always use the supplied
gloves from the accessories box to ensure a better grip and to avoid
fingerprints on the device.
WARNING
Personal injury caused by falling device or collapsing supporting structure
Risk of death or serious injury to the head
➡
Before mounting the device, follow the manufacturer’s instructions re-
garding the maximum permissible carrying capacity of the supporting
structure (ceiling/wall).
➡
To mount the optionally available Mountera® Wall Bracket or
Mountera® Ceiling Bracket, only use screws and, if necessary, dowels
that are suitable for the ceiling/wall type and construction material,
such as for example:
•
Plastic screw anchors for use in solid masonry materials (concrete/
brick)
•
Gravity or spring toggle anchors for use in drywall systems (plaster-
board)
➡
Before mounting or removing the device, always ensure that it is
properly secured against falling with a secondary safety component
(safety cable) on the outside of the housing.
In addition, strictly observe the locally applicable regulations regard-
ing the mandatory measures for securing your camera system against
falling while in operation.