dallmeier DDZ5200HD Series, Manual

Page: 64 / 80

64
COMMISSIONING – DDZ5200HD Outdoor Series | REV. 1.0.0 | © 2021 Dallmeier
➡
If necessary, pan the device carefully and with normal force in
the required horizontal direction (if you intend to do this, turn
the locking screw of the Mountera® Quick-Lock System by 180° in
counterclockwise direction beforehand and make sure to tighten it
again afterwards).
➡
Connect the network cable to a suitable network switch.
➡
Connect the power cable to a suitable power supply unit (observe
the chapter “Connections and Pin Assignment” on page 66).
➡
Connect the used power supply unit to the mains socket.
The device starts and is ready for operation after a few minutes.
Fig. 41
㉜
5.0 mm
2
2
±180°
1
3