dallmeier DDZ5200HD Series, Manual

Page: 24 / 80

24
COMMISSIONING – DDZ5200HD Outdoor Series | REV. 1.0.0 | © 2021 Dallmeier
8 Maintenance, Inspection and Cleaning
Maintenance and Inspection of the Device
The operational safety of the device has to be inspected periodically by
qualified personnel.
However, note in this context that all maintenance, inspection and repair
work on the device may only be carried out in compliance with the locally
applicable regulations (regional and country-specific legal requirements and
standards), such as the DIN VDE 0701-0702* series of standards.
*
VDE 0701-0702: Inspection after repair, modification of electrical appliances –
Periodic inspection on electrical appliances –
General requirements for electrical safety
WARNING
Electrical shock caused by live electrical parts
Risk of death or serious injury
➡ All maintenance and repair work on the device may only be carried out
in a voltage-free state (verify the absence of voltage).
NOTICE
Possible damage to the surface coating of the polycarbonate dome bubble
as well as reduced image quality due to fingerprints
➡ Do not touch the polycarbonate dome bubble with bare fingers.
Instead, always use the supplied pair of gloves to prevent a reduction
in image quality due to fingerprints and to protect the surface coating
of the dome bubble from possible damage caused by sweat and grease
deposits.