28
T4/T8 Thermal Image Camera User Manual
DALI
Press OK button to call out the “Adjustment” under menu “Measuring
Setting”. In this menu , Emissivity, Tcorrect, Distance , Humidity ,TReflect can be
set. Use UP &Down button to select. Use LEFT & Right to set the value. ” >” means
there is sub menu, press Right Button to enter the sub menu.
Emissivity： Different target has different emissivity, so the user can set different
emissivity for different target. If it is not set , then will use default setting. Attached
Common emissivity table for reference.
Tcorrect： Correct the target Temperature.
Distance： Setting the distance between the camera and the target to make sure exact
measuring. Set the real distance if the distance is shorter than 10 meters. (unit 0.5m)
Humidity： Set the humidity of the using environment.
TReflect：It will only functioned after it is enabled. Can use fixed temp as reference
temperature.
4.6.3 Image Setting
Image Setting Menu
Press OK button to call out the Image setting menu under"Setting".in this menu ,
Manual/Auto-Enhance Mode: Alarm types, Alarm Tempe , IR transparency， Alarm
color, Alarmlink, Tiem Interval can be set. Use UP &Down button to select ,use LEFT
& Right to set the value. ” >” means there is sub menu, press Right Button to enter the
sub menu.
Manual/Auto/Auto-Enhance Mode：Adjust the image quality for the user to get
better image for analysis purpose
When Auto-Enhance Mode is activated，can switch between manual and
automatic. Press “A “ button will enter manul mode,it can adjust the pallet with “UP,