15
T4/T8 Thermal Image Camera User Manual
DALI
3.3.2 Temperature Measurement
To move the target object to the screen on the point of crossing temperature, the
upper-right corner of the screen shows "XX" is the temperature measurement point
at the target temperature. If you want to measure more accurately, keep press the "A"
button for 3 seconds。
If wish to detailed analysis the thermal image of the current screen, you can press the
"S" key to frozen the image, then analysis. Sustainable pressing the "S" key for 3 seconds,
the thermal image stored, and then analyzed.
When the target temperature is greater than or less than the relevant thermal image'
Max or Min temperature, the temperature of the screen display> XXX ℃ or <XXX℃ .
If you need to modify the properties of the temperature measurement object, you
should first check the temperature of the object, and then press the Enter key, the
temperature of the object's Properties dialog box pops up on the screen. The following
figure is the temperature measurement points, the temperature line, the temperature
measurement area of the Properties dialog box:
Point Measurement Properties Dialog Box
The attributes of the measurement points can be modified amplitude coefficient
ratio, the distance and the reference object, the left and right arrow keys to the left and
right selection, press the A key to switch up and down. Temperature value is displayed
when the "reference object" option changes to "open", and other measuring object with
the temperature difference of the temperature measurement points.
Line Measurement Properties Dialog Box