16
T4/T8 Thermal Image Camera User Manual
DALI
Line temperature measurement properties can be modified amplitude coefficient
ratio, distance, maximum temperature, minimum temperature, average temperature,
maximum temperature difference, the crossing point temperature and the reference
object, the left and right arrow keys to the left and right selection, press the A key to
switch up and down. Temperature value is displayed when the "reference object" option
changes to "open", and other measuring object with the temperature difference of the
temperature measurement points.
Area Measurement Properties Dialog Box
Area temperature measurement properties can be modified amplitude coefficient
ratio, distance, maximum temperature, minimum temperature, average temperature, the
maximum temperature and the reference temperature properties can be modified, and
the left and right arrow keys to the left and right selection, press the A key to switch up
and down. Temperature value is displayed when the "reference object" option changes
to "open", and other measuring object with the result of the temperature difference
between the temperature measurement of the temperature measurement area
! Note: It can only set one reference target.
3.3.3 Save Image
Obtain the current image to store, you can choose one of the following four ways：
●
Press Ok button and will show panel menu, select the "photo" option in the menu,
the system will automatically save images
●
Press S key, the image will froze, and press the same key again and the image will be
saved.
●
Keep press S key for 3 second, the image will be automatically saved.
●
To set a shortcut key as Take Photo, then just need press this key to save image.