DALEMANS U-V6, Instruction Manual

Page: 42 / 67

DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6 Instruction Manual
41 | 65
Certified
ISO9001 • VCA
www.dalemans.com
4.4 Statuses Menu
The Statuses Menu
allows the user to view the status of the components of the U•V6 unit.

Sub-menu Contents
Measurement
Channels
Provides the statuses for each channel:
- Disabled : the system
considers this channel to be
inactive
- Measurement Display

Outputs
Provides the status of the outputs:
- The system considers this
output to be disabled
- enabled / disabled

Analogue Output
Gives the status of the analogue output:
- The system considers the
analogue output to be
disabled
- 0-20mA: if the user presses
ENTER, the system gives the
output current in mA
- 4-20mA: if the user presses
ENTER, the system gives the
control output current in mA

Power Supply
Indicates the status of the unit, i.e.
connected to the mains or battery use,
where applicable. The voltage of the
unit is displayed when the user
presses
ENTER .

Battery
States whether or not a battery is
present. If a battery is present, the
voltage of the battery is displayed
when the user presses
ENTER .

Temperature
Indicates the temperature of the U•V6
unit: pressing
ENTER causes the
system to display the minimum,
average and maximum temperatures.

4.5 Test Menu
This Test Menu allows the user to check that the display or the LEDs on the front panel are
working correctly. Gas detection works as per usual while a test is being carried out.

LEDs tests

Display tests

Sub-menu Contents
LEDs tests
Run a test sequence that makes
the LEDs blink one after another
Display tests
Run a test sequence that displays a
character on each character
position successively, while
changing the display’s backlight
Measurement channels
Outputs
Analog Output
Power supply
[Value]
xxxx
Battery
[value]
Battery xxxx
Temperature
[xx °C]
xx °C