Daktronics DAKT-0204-02, Manual

Page: 47 / 63

Installing and Configuring a DataProbe iBoot G2 for
Street Furniture
DD2594516 Rev 1
31 July 2013
PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
Web Browser Operation
Password Protection
iBoot-G2+ uses two username/password credential sets, one for
normal power control (User) and one that also provides access to the
setup functions (Admin).
Daktronics Default Credentials:
Role Username (fixed) Password (user set)
Administrator admin admin
User user user
Open you browser and enter the IP address of iBoot-G2+ into the
address bar. If you have changed the IP address by any of the
methods described, enter the address, otherwise, use the default IP
address.
Note:
For security purposes, change the default password.
Enter the username and password as prompted. When the proper username/password is received the
Control and Status Page is displayed.
iBoot-G2+ uses an inactivity timer for security. This timeout is user selectable from 0 to 99 minutes.
Setting to zero disables the timeout feature. When there is no activity for the set time in minutes, the user
is automatically logged out and the username and password will need to be entered again for access. This
is to prevent accidental lockout by leaving the user logged in.
Note:
As the iBoot-G2+ allows only one Web user logged in at any time, use caution when disabling
the timeout feature, as it is possible to lock out other users by forgetting to logout. Closing the
browser will not log the user out and will lock out web access. If you do become locked out, access
the iBoot-G2+ via Telnet and reboot
the unit, or press the reset button.
Control and Status Page
Once the user is validated, the Control and
Status is displayed. (Only one person can
be connected to the iBoot-G2+ at a time).
Figure 9: Connection
Figure 10: iBoot Status
Figure 11: iBoot Status Example